Diesel Engine Pump

Stationary horizontal centrifugal diesel engine pump

    Flow:

     

    Lift:

     

    Caliber:

     

    Power:

     

    Temperate: ≤80℃

Email: [email protected]

 

Phone: +86-18837847418(WhatsApp)

IS series are single stage single suction cantilever type centrifugal pumps. They are used to pump clear water or liquids with similar physical or chemical properties as clear water and without solid particles. IS type pumps are used to deliver liquids with temperature lower than 80 centigrade degrees; ISR type pumps are used to deliver hot water with temperature lower than 130 centigrade; ISY type pumps are used to deliver light oil, for example gasoline and diesel.

Working conditions

The highest working pressure of this series of pumps is 1.6MPa. That is, the pressure at pump outlet, which is equal to the pressure at pump inlet plus the head of the pump, should not be larger than 1.6MPa. The test result of the pump body’s static pressure is 2.4MPa. If you need the pressure of the pumping system to be larger than 1.6MPa, please remark it when placing the order.

Main applications and applicable range

ISG series is a kind of single stage vertical centrifugal pump optimized and designed on the basis of IS type pump. It has the features of pipeline pumps, mainly used to boost pressure in pipeline system. It can totally take the place of IL, IS type pumps in many different occasions, such as water supply and drainage in industries and cities, pressure boost in water tower for water supply in high level buildings, pressure boost for firefighting, water delivery in long distance, heating and cooling circulation, etc. As the hydraulic model of this series of pumps is same as that of IS series, this series of pumps hold the high efficiency and energy-saving features of IS type. In addition, the pumping part and the motor part are elastically connected. The pump is installed vertically, using mechanical seal.

It is supported with advanced damping device. This series of pump runs stably and reliably. It has advantages like low noise and wide application range, etc. It is ideal single stage single suction centrifugal boost pressure pump for circulating pipeline.

pump process

Packaging of Products;

Henan Mingke Pump Products are packed and labeled according to the regulations and customer's requests.

Great care is taken to avoid any damage which might be caused during storage or transportation.

In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

1)ZC Standard 

2)Customization

pump pack1

pump pack2

pump pack2

Click here for price
Click
here
for
price

We will contact with you within 8 hours

* Name:
* E-mail:
* Country:
* Tel:
* Detail: